Hello,
Hoping someone will give me a hand with this.
Eth0-
DHCP from ISP
Eth1- Trunk to HP1910
VLAN 20 Biz 10.10.20.1 (DHCP 10.10.20.10-254)
VLAN 30 Pub 10.10.30.1 (DHCP 10.10.30.10-254)
No routing between VLANs
Routing to and from Eth0 only (internet access)
Eth2- 192.168.2.1
I've configured the following so far-
Eth0 DHCP for my ISP
Eth1 Created both VLANs 1.20 & 1.30 and assigned IP address of 10.10.20.1 & 10.10.30.1 respectively as well as DHCP servers for both VLANs .10-.254
Eth2- 192.168.2.1 DHCP 192.168.2.2-254 (for administration without layer2 switch present)
The routing part is what I would like some assistance with please.
Thanks!
Mark