Policy route openvpn traffic

Looking to see if someone can look at my config and help me understand why my policy route is not working.

firewall {
    all-ping enable
    broadcast-ping disable
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians enable
    modify SOURCE_ROUTE {
        rule 10 {
            description "traffic for airvpn"
            modify {
                table 1
            }
            source {
                address 10.69.12.0/24
            }
        }
    }
    name WAN_IN {
        default-action drop
        description "WAN to internal"
        rule 10 {
            action accept
            description "Allow established/related"
            state {
                established enable
                related enable
            }
        }
        rule 20 {
            action drop
            description "Drop invalid state"
            state {
                invalid enable
            }
        }
    }
    name WAN_LOCAL {
        default-action drop
        description "WAN to router"
        rule 10 {
            action accept
            description "Allow established/related"
            state {
                established enable
                related enable
            }
        }
        rule 20 {
            action drop
            description "Drop invalid state"
            state {
                invalid enable
            }
        }
    }
    receive-redirects disable
    send-redirects enable
    source-validation disable
    syn-cookies enable
}
interfaces {
    bridge br0 {
        address 10.69.13.1/24
        aging 300
        bridged-conntrack disable
        description "Local Bridge"
        hello-time 2
        max-age 20
        priority 32768
        promiscuous enable
        stp false
    }
    ethernet eth0 {
        address dhcp
        description Internet
        duplex auto
        firewall {
            in {
                name WAN_IN
            }
            local {
                name WAN_LOCAL
            }
        }
        speed auto
    }
    ethernet eth1 {
        bridge-group {
            bridge br0
        }
        description "Local Bridge"
        duplex auto
        speed auto
    }
    ethernet eth2 {
        bridge-group {
            bridge br0
        }
        description "Local Bridge"
        duplex auto
        speed auto
        vif 1337 {
            address 10.69.12.1/24
            description AIR_VPN
            firewall {
                in {
                    modify SOURCE_ROUTE
                }
            }
            mtu 1500
        }
    }
    loopback lo {
    }
    openvpn vtun0 {
        config-file /config/AirVPN_Canada_UDP-443.ovpn
    }
}
protocols {
    static {
        table 1 {
            route 0.0.0.0/0 {
                next-hop 10.4.0.1 {
                }
            }
        }
    }
}
service {
    dhcp-server {
        disabled false
        hostfile-update disable
        shared-network-name AIRVPN_DHCP {
            authoritative disable
            subnet 10.69.12.0/24 {
                default-router 10.69.12.1
                dns-server 8.8.8.8
                dns-server 4.2.2.1
                lease 86400
                start 10.69.12.20 {
                    stop 10.69.12.50
                }
            }
        }
        shared-network-name LAN_BR {
            authoritative enable
            subnet 10.69.13.0/24 {
                default-router 10.69.13.1
                dns-server 10.69.13.1
                lease 86400
                start 10.69.13.38 {
                    stop 10.69.13.243
                }
            }
        }
        use-dnsmasq disable
    }
    dns {
        forwarding {
            cache-size 150
            listen-on br0
        }
    }
    gui {
        http-port 80
        https-port 443
        older-ciphers enable
    }
    nat {
        rule 5010 {
            description "masquerade for WAN"
            outbound-interface eth0
            type masquerade
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
}
system {
    host-name ubnt
    login {
        user ubnt {
            authentication {
                encrypted-password ****************
                plaintext-password ****************
            }
            full-name ""
            level admin
        }
    }
    ntp {
        server 0.ubnt.pool.ntp.org {
        }
        server 1.ubnt.pool.ntp.org {
        }
        server 2.ubnt.pool.ntp.org {
        }
        server 3.ubnt.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
    time-zone UTC
}

I just want anything on the 10.69.12.0/24 network to head out vtun0. I followed this guide: https://help.ubnt.com/hc/en-us/articles/204952274-EdgeMAX-Policy-based-routing-source-address-based- but it is not working. Can someone help me out?