ERL-3:
eth2: WAN
eth1: LAN
eth1.1003: Guest LAN
Switch:
VID 1003 tagged on ports 1 and 2
Port 1 is ERL-3 eth1, port 2 goes to UAP-AC-PRO
UAP-AC-PRO:
LAN SSID untagged
Guest LAN SSID on VLAN 1003
Hi all, I recently setup a guest LAN SSID that is isolated from my LAN. Firewall is configured such that guest LAN clients can access ERL-3's DNS server and DHCP server, as well as the WAN. Otherwise, connections to LAN are blocked unless a client on the LAN side initiated the session. This is all working well.
However, when I open up my dashboard and enable eth1, eth1.1003, and eth2 in the traffic monitoring graph, I'm seeing only tiny blips on eth1.1003, and the bulk of the guest network traffic (e.g. from speed tests or other high-bandwidth traffic) shows up as part of eth1.
Is this normal? Is there a way to make it show up as traffic on eth1.1003? I'd love to be able to tell how much traffic is being used by my guest LAN vs my regular LAN.
