I am using Edgerouter poe and I have the wan connected to eth1, the LAN is on eth2 and eth3 (switch 0) and the DMZ is on eth 4
The IP of the router is 172.16.54.26
The network of LAN is 10.1.0.0/16
The network of DMZ is 10.2.0.0/16
I need to apply the following rules:
LAN to Router -->ok (will be able to access the router)
LAN to WAN --> ok (will be able to access the wan or ping google)
LAN to DMZ --> ok (will be able to access or ping any device on eth4)
Wan TO Router --> ok (will be able to access the router)
WAN to LAN--> nok (will not be able to access the LAN)
Wan to DMZ --> ok (will be able to access or ping any device on eth4)
DMZ to Router --> nok (will not be able to access the router)
DMZ to LAN -->nok (will not be able to access or ping any device on switch 0)
DMZ to WAN --> ok (will be able to access wan or ping google)