Routing based on DPI / Traffic Analysis
Sorry if this is a repost, couldn't find another. While the DPI/Traffic Analysis is a cool retrospective review feature, is there any way I can setup routing or traffic shaping rules based on the DPI?...
View ArticleConnect Edgerouter to IPSec vpn as a client
Ive seen a few tutorials for setting up the edgerouter as an IPSEC server. However I would like to connect it to my remote Ubuntu ipsec server as a client using user/pass and shared secret. Can...
View ArticleEdgeMAX EdgeRouter software version v1.9.0 has been released!
http://community.ubnt.com/t5/EdgeMAX-Updates-Blog/EdgeMAX-EdgeRouter-software-release-v1-9-0/bc-p/1643335
View ArticlePOLICY BASED ROUTING USING DESTINATION PORT
Hi guys, I am trying to configure my network for FTP and CPanel PBR on my Edgerouter Lite. I have three ISP's connected to the EdgeRouter Lite as follows 1. eth0 - 192.168.1.1 - ISP 12. eth1 -...
View ArticleClik here to view.
Missing Remove Service for DDNS Entry
Using the newly released 1.9.0 on my ERL. I've had these DDNS entries around for quite some time through some upgrades (the first entry was around since the DDNS Web UI appeared). But as you can see, I...
View ArticleEdgeRouter Pro 8 crashing
I recently noticed my Router is crashing almost daily. I am working to get my Serial Cable connected to it so I can get a crash log. In the meantime I'm looking for *any* posisble suggestions....
View ArticleUnifi Voucher and Antamedia
Hi everyone, Could you help me how will I gonna make this setup work? My current setup is:1 ER-X1 US 48 750W switch2 US 24 500W switch70+ UAP-LR I want to have 2 SSIDs, 1 going to my antamedia server...
View ArticleScheduled tasks are not executing
I added a scheduled task like this: configure set system task-scheduler task uptime_monitor executable path /config/uptime_monitor.sh set system task-scheduler task uptime_monitor interval 1m save...
View ArticleRestored ER-Lite with EMRK and can't log into the GUI
I'm well aware that this is a warranty voiding exercise, but stay with me for a bit... I had an ER-Lite that the USB flash died in it. I've since replaced it with a SanDisk USB flash drive and will...
View ArticleEDGEMAX cannot ping and open remotely
hi! my edge router poe 5 is running and im using public ip/static ip for my wan 1 port. and i tried to ping to other internet connection not same network the wan 1 public ip.. I cannot ping. and how...
View ArticleFailed upgrade to 1.9
Just tried upgrading to 1.9 and it failed with my EdgeRouter Lite going into a boot loop. Here is the console output: Looking for valid bootloader image.... Jumping to start of image at address...
View ArticleSetting VLAN ID in EdgeRouter vs in Modem?
I saw that 1.9.0 added the option in the wizard to specify the VLAN ID for a PPPoE connection. For my ISP in Australia, we need to specify a VLAN ID. However, I know some ADSL/VDSL modems also support...
View ArticleEdgeOS 1.9.0, IPv6 and Comcast
It took me a bit to figure this out. So, I documented it... It came down to figuring out what the prefix length for Comcast was... /60. https://ultramookie.com/2016/2016-08-08-edgeos-ipv6.html
View ArticleSOLVED: Cloudflare DDNS 1.9.0
All, I'm attemping to configure Cloudflare DDNS on 1.9.0, and I guess I'm missing how you do this. Any hints?
View Articlemodels with USB drive
I've been curious... Is the ERLITE-3 the only model with a USB drive for it's internal storage? In general it's been my go to base model because it's less storage and offload restricted than the...
View ArticleEdgeRouter Lite Settings for Gigabit ISP
Hello everyone, Just today I got a symmetric gigabit ISP, however when my traffic goes through my router, there is a definite hit taken on the speed. The best I've gotten through my router is about...
View ArticleIs it possible to make config changes via a cronjob?
ER-poe5 running v1.9.0 I need to change traffic policy (both limiter bandwidth and shaper bandwidth) every evening and morning. Can this be automated with a cronjob?
View ArticleISP IP Passthrough
Hello, I would buy a EdgeRouter Lite to replace the box from my ISP but before I would like to know if you can configure it to pass the public IP address to the firewall (pfSense) on lan. I not want to...
View ArticleRouted IPTV
Hello everybody, I recently bought a new ERPoe‑5 and try to get working with my ISP. The router will be used for normal internet traffic and IPTV. Configuration:eth0 interneteth0.4 VLAN 4 for IPTVeth1...
View ArticleDMZ under edgerouterconfig.nl config cannot reach internet!
Hi, Used the config from https://www.edgerouterconfig.nl/basis-community-config/ with v1.8 ERL firmware which has the following configurations: eth0 = WANeth1 = LANeth2 = DMZWAN is on the basis of...
View Article