Forward ESP Protocol to Separate VPN Server
Hello all! I just bought an EdgeRouter Lite and I am completely new to it, so I'm learning a bunch of stuff. I've dealt with a couple of different routers in the past and to me this thing is a very...
View ArticleVLAN to LAN communication
I have a Edgerouter and I'm trying to get my old (10.0.1.X) network and my new (192.168.10.X) network to communicate with it. eth0 = WANeth1 = LAN (192.168.1.X)eth1.10 = VLAN (192.168.10.X)eth1.11 =...
View ArticleBlock outgoing connections for some users
What's the easiest way, preferably with the GUI (though not essential) to set up a firewall rule to block outgoing connections while still allowing internal connections for an IP Address range? I'm a...
View ArticlePort Forwarding -> Auto firewall rules stop working
I currently have ports forwarded on my router using the GUI and have enabled auto-firewall rules. I have struggled with these since I first bought the router 8 months ago. They work, then they don't....
View ArticleRouting table confusion
ERPOE 1.9.0 I have 3 pppoe connections and a static (eth0), so I want to create a table for each, as per the PBR document. clarknova@RTR-Lancaster-Place# show protocols static table table 1 {...
View ArticleHome Network Setup Suggestions
I am setting up a brand new home network.I have 9 wired connections:-3 Desktops, 2 Android Boxes, 1 CCTV DVR & 3 UAP AC LRWhat would be an ideal set up with performance and reliability in...
View ArticleEdgeRouter X commit failure ?
ubnt@router# commit [ service ssh listen-address X.X.X.X ] sed: can't read /etc/ssh/sshd_config: Input/output error Commit failedI'm trying to configure SSH listen-address.... I have tried to reboot...
View ArticleERLite-3 End of Life Concerns
I am thinking of purchasing the least expensive router for home use so I can get software that is maintained by the vendor. But as near as I can tell the hardware powering this model is REALLY old in...
View ArticleEdgerouter ER8 's Configuration
Happy New Year, I had a hard time configuring the router. I used the Wizard WAN+2LAN2 to set it up. When it finally worked, the Internet was very slow. I disconnected the ER8 and connected the 24 port...
View ArticleInvalid packets being sent to Internet
Hi, I recently reworked my firewall rules on my ERLITE-3 router, adding a "drop invalid" rule to every ACL. I am seeing a number of rule hits for my WAN_OUT ACL. One example is the following which is...
View ArticleNetflow and bandwidth usage - Enable and Check Configuration
I have searched the forum and looked at various posts but I did not find anything that would allow me to verify my settings. First some background and some open questions 1) I really like the DPI...
View ArticleDynamic DNS External IP
I am successfully using the dynamic DNS feature using my providers web url to obtain my external IP. How can I instruct the edgerouter to use my known external IP? I don't see this option. If I don't...
View ArticleVlans and DHCP Server
I have a question towards the bottom here...but I wanted to give my background and system setup before I ask it: I am new to this type of router/switching setup scenarios. I am pretty well versed in...
View Articlevpn first time l2tp/ipsec
Well config posted below, cleaned a little bit. With the config below i cant connect at all. would really appreciate any pointers.vpn { ipsec { auto-firewall-nat-exclude disable ipsec-interfaces {...
View ArticleERLITE + transparent proxy (external squid)
If anyone has already done this type of setup do you mind posting your config info like squid.conf. Also your erlite config additions. I saw...
View ArticleOpenVPN - can't ping subnet at one ER-X 1.9.1
I have two sites running ER-X with EdgeOS 1.9.1 with openVPN connecting to one site (site A). I can ping both sides of the vtun0 interface at either site and can ping from Site B the subnet at site A...
View ArticlePPPoE broken in 1.9.1?
I just upgraded my EdgeRouter lite from 1.9.0 to 1.9.1 and discovered I had no more Internet. Using the command line "show interfaces pppoe pppoe0" it showed "pppoe: Coming Up" The logs showed:Jan 1...
View ArticleL2 bridge over GRE and MTU
Hello,I try to establish a connection between a Unifi AP AC Pro and the Unifi controller using Layer 2 bridge over GRE between two Edgerouter ER-X.I can already ping the AP from the controller but the...
View ArticleBonding vs Load Balance
(This whole discussion is internal network, not WAN) I'm toying with an idea about what the best way to do a redundant link to each of my towers is. The idea being each tower connect will be 2 AFX...
View ArticleClik here to view.
Trouble setting up Edgerouter Pro
Goal:I'm trying to set up a home network with Edgerouter Pro and 3pieces of UAP-AC-PROs. The idea behind this is to have good wifi coverage throughout the whole house with as good roaming as possible...
View Article