ER Pro routing problem
I know I am in over my head on this, but gotta learn somehow... Issue;When ER8 Pro is set up via wizard, load balancing 2 WAN (eth0+eth1) to 1 LAN (eth2), DHCP enabled (192.168.100.0/24) all is...
View Articleautomatic backup configuration
Hello Guys, Does anybody had the chance of configuring automatic backup for edge router. We have deployed hundreds of this products and we are looking of automating the backup process if its possible,...
View Articlessh from LAN and WAN
I want to ssh in to router andI want to access ssh port 22 from LANand ssh port 9091 from WAN how to do this in cli.. thx ?
View ArticleBackup IPsec over failover WAN
Carried over from this thread where introduced a script to fix / insert connceted routes to ubnt-add-connected.pl when a load-balance/failover event occurs. Next step I'm trying to accomplish is to...
View ArticleEdgerouter Pro 4 Wan + 4 Lan config
Hello! I just instlled new site with Edgerouter and i need to configure it properly. So i updatet firmware to 1.9.0 and used Wizard called Load Ballancing. I configured all my 4 Wans and 1 Lan for...
View ArticlePort Forwarding / Firewall
I'm trying to setup remote access for a Plex server, but I can't get it working.Config came from a 2WAN failover template, and port forwarding rule came from the port forwarding wizard.Config below is...
View Articlevlans enviroment, built-in switch, vlan isolations firewall. What interface?
Hi guys! In a vlan enviroment in built-in switch0(eth2,3,4) on ERPoe-5, could I link the firewall to swith0 interface? I tried on a test setup, but only seems to work if link the firewall to a...
View ArticleMultiple Gateways on one Port
In one of our locations we added another /27. The problem is the ISP attached both ranges to the same port. Network 1xx.xx.78.64/27Gateway: xx.xx.78.65 Network 2xx.xx.78.192/27xx.xx.78.193 Currently...
View ArticleIPv6 Firewall rules to block fd00::/48?
I would like to add firewall rules to block fd00::/48 (IPv6 unique local addresses) both out and in to my ER-X.Are there any other IPv6 addresses I should also block? OopsForgot to mention my IPv6 is...
View ArticleClik here to view.
Some setup advice please
HiAm replacing our ageing wireless network. We currently have 21 sites that work over wireless links. Below is a proposed setup between our three primary sites. Will this combination of routers and...
View ArticleENTITY-MIB data is of Wrong Type?
The ENTITY-MIB seems to output invalid data: ENTITY-MIB::entPhysicalDescr.1 = STRING:...
View ArticleClik here to view.
Can EdgeRouter DPI tell LAN clients apart if they are behind another router...
Hi all Can the DPI in EdgeOS tell specific clients apart if they're behind another router (though not NATed)? Specifically, say I have an ER that is connected to a Cisco 3750G layer3 switch. The Cisco...
View Articleedgerouter poe l2tp vpn ping loss
Hi I am using edgemax router and the model name is edgerouter poe 5 port.If you configure l2tp vpn and use vpn connection on Macbook and iPhoneThe Internet is very slow.After checking, I was...
View ArticleSupport for BGP Large communities
Hi, IETF is working on large communities, to enable owners of a 32bit ASN to do something with BGP-communities as well. I have just ordered two ERPro‑8's and have a 32bit ASN and I would like to use...
View ArticleClik here to view.
Not displaying any animations in MAC OS El Captain - ER Lite v1.9.0
None of the animations are being displayed in MAC OS. using v1.90 Windows and Linux no issues. Just Mac OS. I think we need another update/firmware revision.
View ArticleEP-R8 Need Suggestions for Routing Examples
I'm new to the Ubiquiti Edge devices and am looking at setting up an EdgePoint R8 to control a bunch of AC Rockets for client internet access. Ideally I want to provide two customer options: ISP is...
View ArticleOpenVPN server behind edgerouter
Hey guys,quick question. I have my raspberry pi running a openvpn server behind an edgerouter X.I set up the port forwarding for UDP 1194 and I can successfully connect to my vpn.The problem is that...
View ArticleClik here to view.
Help! - Edge Router Lite - No Internet on 2nd Lan port...
I'm really stumped on this issue, would appreciate any help available! I have a new Edge Router Lite. It has been configured basically as a Wan to two lan ports with separate subnets. Internet comes...
View ArticleProblem with pppoe connection
Hello, i got PPPoE running once but after restart i cannot get anny connection. any ideas?
View ArticleClik here to view.
Help a noob route internet traffic from one interface to another
I've managed to set up an Edgerouter with a "management" interface on eth0, three VLANs on eth1 (eth1.20, eth1.30, eth1.40) and a PPPoE connection on eth2. I would like to be able to access the...
View Article