Clik here to view.
Edgerouter Lite 100% CPU on 130Mbps
Hi, yesterday my aparment building had a power outage for a few minutes and all my networking equipment went down. When it got back up the maximum thoughput I could get was ~130Mbps. Here is my current...
View ArticleVPN | connecting to different subnets
Hi, I have an EdgeRouter-Pro with four subnets configured.Now i wanted to configure l2tp/ipsec, so that some windows clients are able to connect to a subnet. This is working so far, but i see no way to...
View ArticleWhy can't I keep a remote access VPN working? L2TP or PPTP, is there a...
So I'm trying to setup my remote access VPN. Both IPSec/L2TP and PPTP work for awhile, then stop accepting new connections, authenticating, anything. Rebooting the firewall corrects the problem...
View ArticleMulti Wan load balancing question
Hi,I know the edgerouter series can be set up to load balance using multiple wan interfaces,However all configurations seem to be load balancing throughput. We have a situation where we have multiple...
View ArticleTime of day bandwidth restrictions
It took me a little while to figure it out, but I eventually managed to create some time of day bandwidth restrictions and thought I'd share what I did so someone else can find it easily. In this...
View Articleipsec remote ip range not showing
I am attempting to setup a new pair of routers for when BT eventually gets ourfibre lines installed and need some assistance.I'm getting a vpn tunnel setup between the two routers and have managed to...
View ArticleAll ports show as "connected" but they are not...
Just got a new EdgeRouter Poe (ERPoe-5) .... running latest firmware 1.9.0, set up using the WAN+2LAN2 wizard with bridging turned on. No other config has been completed, but all my interfaces are...
View ArticleEdgeRouter X LAN Failover Config
Hello! I'm trying to setup a failover for my WAN connection. I'd like my second WAN (eth2) to only be used when the promary fails (eth0). At the moment, both interfaces are getting IP addresses...
View ArticleMy Edgerouter X is dead
Hmm... I connected my EdgeRouter X POE to a ToughSwitch PoE Pro switch and discovered that it's not 48v compatible. It seems the magic smoke has been let loose. Can I suggest you silk screen the...
View ArticleCustom logfile in /var/log is removed automatically
Hello guys, I would be obliged if someone could help me with the following problem with EdgeMAX EdgeRouter Pro: I have set up a transition script for load-balancing logging status changes of the...
View ArticlenProbe + post-NAT addresses
Hello, I am using nProbe for Netflow probing and L7 analysis. I am running the nProbe instance inside my ERL. This is the configuration file I am using: --collector none --interface eth1 --verbose 0...
View ArticleEdge Router Pro to Cisco ASA VPN
I know there are quite a few posts about this one but I can't get the VPN to pass traffic properly. I can see on the EdgeRouter that the tunnel is up (likewise on the Cisco ASA) and I can ping every...
View ArticleBGP issue with EdgeOS 1.9
We are currently experiencing an issue where our BGP sessions reset, from what appears to be from receiving an invalid as-path. The only thing we are seeing in the logs are (slightly sanitized): Nov 3...
View ArticlePerformance with sFlow export enabled?
Just a quick question.. I have an ERL connected to my home Internet connection, and I've noticed that my throughput is limited to about 100Mbps (with 100% CPU usage) when sFlow export is turned on. I...
View ArticleER8 (v1.9) DHCP IP Assignment / IP Conflict Loop for one OSX client
I am running into an interesting issue, and not sure exactly what the issue is - from what I can observe, there is an older model iMac on my internal network, and when it requests an IP through DHCP,...
View ArticleVPN Down for ~4:10 minutes several times per day
I have a site-to-site VPN with two EdgeRouter Pro's (1.8.5) as the endpoints, each end has a 100Mb fiber internet connection-- one with AT&T and one with Level 3. The link goes down for about 4...
View Articlecommit-archive failing? SOLVED -- human error...
I have: config-management { commit-archive { location scp://cerberus:xxxxxxxxxxxx@mgmthost/home/cerberus/commits/ } }And when I commit, I get:Archiving config... scp://mgmthost/home/cerberus/commits/...
View ArticleClik here to view.
Error message on ERLite-3
I have a new Edgerouter Lite 3 port, that I have been working with from time to time without issue. I have reset the router back to defaults and upgraded to the 1.9 firmware, to now actually set it up...
View Article'configure' command starts up with errors
When I run 'configure' command as admin user, I get this: admin@ubnt:~$ configureThe specified configuration node is not validSet failedvbash: bind: write error: Broken pipevbash: bind: write error:...
View ArticleClik here to view.
Nat hairpin behind double nated network
I am trying to do nat hairpining behind two nated servers. I have set up a configuration, but after very many hours I have have not yet got it working. Can you help me see my error? The set-up looks...
View Article