Further setup questions on new ER-X (1.9.0) - GUI authentication and package...
OK, so, background as previously mentioned: I have an ER-PoE in service running v1.4.1, and I'm trying to set up a new ER-X running 1.9.0. And some weird things are happening, and I have a number of...
View ArticleClik here to view.
EdgeMax and netflow: all my packets are registered twice...
Hello everybody, I succeeded to configure my EdgeMax as a bridge, capturing all network traffic and send it with netflow to my monitor, see...
View ArticleRFC1918 Filtering
All - I setup the ER Pro8 with the LAN2 Wizard. Works like a champ. Do I need an RFC1918 Filter for Egress -- or does the ER do it automatically?Something like network-group RFC1918 { network...
View Articleedge pro vs watchgaurd xtm 330
I am trying to decide which firewall/router to go with. A 5year old watchguard xtm 330 or a edgerouter pro. The specs for each are a 'bit' confusing. The comparison is as...
View ArticleER Load-Balancing: Lock VoIP/PBX to one Route
Hi there, I'm setting up an ER-X with load balancing two PPPoE-Connections. Everything is fine, except the VoIP-Connection for one of the ISPs (WAN1) (all others SIP-Numbers work like a charm and...
View Articledefine port alias
Hello, i was wondering if it is possible to define an alias for particular ports.example: it is possible to do forward a port by portname "ftp" or "http" which stands for 21 or 80. is there a way to...
View ArticleEdgeRouter X - Management VLAN
Good Morning, I got an EdgeRouter X with two subnets on eth1 and eth2. Each has a Unifi AP AC Lite behind a Netgear GS105ev2 switch. I would like my Unifi Controller on a local server to be able to...
View ArticleERPro 1.9 WAN Failover
I have been having some failover issues where my WAN connection fails over and back pretty quickly a bunch of times. I opened a ticket with our provider but they want some evidence, what logs, if any,...
View ArticleERL - (1.9.0): IPSec/L2TP server crashes after about 12 hours?
Morning,I've got an L2TP remote access VPN setup. Works just fine, from reboot, until approximately 12 hours later, then I can no longer make any connections until I reboot the firewall, which will...
View ArticlePortForwarding fails when i plug WAN2 , advice welcomed
Hello EdgeMax Gurus Im a newbiew here, dipping my toes. I have an EL3 with a wizard setup for dual wan with load balance. v190 We have some PortForwarding rules that work fine, as long as I keep the...
View ArticleIs It OK to Enable Traffic Analysis Enabled Indefinitely?
I am just now starting to explore the DPI capabilities of the EdgeRouter. I am wondering if it is designed to be left on indefinitely or if it only should be used short-term to diagnose/analyse...
View Articleauth.log is not consistently capturing SSH logons
As the subject says, the auth.log file is almost never capturing SSH logons. I am not certain why it does one every few weeks or so, but the vast majority nothing. I did check and verify that there...
View ArticlePort forwarding to local server
Hello community, maybe this is super simple but i dont get this to work. My edgerouter x sfp eth0 is configured as a wan port to communicate with my modem. The other ports eth1-4 are configured as...
View ArticleBlock Traffic If DNS Is Not The EdgeRouter
Hi,I set up filtering with SquidGuard on the edgerouter Lite however a simple workaround is to change the DNS servers on the device to for Ex. google's and it skips the filtering.... How can I force...
View ArticleL2TP not working
Hi all, new to ubiquiti equipment, here is what I have I have a edgerouter lite at one office and another edgerouter x at another site. I have a site to site tunnel working between them nicely. However...
View Articleis it possible with EdgeMAX Lite to have 10 GW pm the WAN segment and load...
is it possible with EdgeMAX Lite to have 10 GW pm the WAN segment and load balance on them?In linux I can do it manually but I am looking for a product that can do this in a much nicer way.
View ArticleDo I need some kind of QoS when voip is on separate Wan port
I have a separate Wan for voip. At the moment the pbx is just part of the Lan. Our normal Wan is 100/100 mbit, our voipwan a separate 1/1 mbit.I have an edgerouter pro.I didn't find the option to give...
View Articlemultiple source address in one firewall rule?
Can I add multiple mac-address' in a "source" for one firewall rule? I have a few, specific devices that I want to have the same rule apply to. It would be easy for me to add (and maintain) something...
View ArticleClik here to view.
GUI Cant Show Advanced QOS Rules on Edgerouter X
Hi, when i login into my edgerouter x and go to the advanced qos page, thats what i seeBut i have rules and its WORKING as it shouldubnt@ubnt# show traffic-control advanced-queue branch { queue 10 {...
View ArticleIPSEC Site to Site VPN Not Working
I am try to setup a site to site vpn in our lab. I had it working last week and all the sudden I couldn't get it connected. So I reset it back to factor and set it up from scratch and I still have...
View Article