ERX SFP passive POE
Does the ERX-SFP do passive POE on pins 4,5,7&8?I've got a little monitoring device that runs at 10Mbit and consumes about 200mA, and I'm wondering if I can get the ERX to power it. Also, will I be...
View ArticleHow to fully support UPnP/GeNA
For a while now I have had UPnP enabled it generally devices are succesfully able to create pinholes as needed. While I was inspecting my firewall logs I noticed messages like...
View ArticleEdgeRouter PoE - Internet access with VLAN
Hi all I've been using an Edgerouter ER5-PoE for around 14 months and it is really working great. Some months ago I started rebuilding the network, also using VLANs instead of different interfaces...
View ArticleBricked EdgeRouter X after firmware update?
Hi All, So I was quite happy with my little EdgeRouter X working silently for 4 months straight after initial configuration. Yesterday I had some WiFi problems which I could not solve, so I thought to...
View ArticleEdgerouter Lite DNS Resolve Issues
HI guys,I recently bought a EdgeRouter Lite and configured as "Load Balancing" using the wizard (both eth0 & eth1 are connected to WAN and eth2 as LAN).Configured DHCP and set DHCP DNS to the...
View ArticleEdgerouter X PPPoE won't connect
Hi,I just can't seem to connect my edgrouter to my modem/internet. I have my modem set in bridge mode and the PPPoe settings configured but it just sits there "disconnected". Really need some help as...
View ArticleClik here to view.
Introducing tmux-stat
Once, long ago, someone wrote a bash script intended for use with tmux (the spiritual successor to screen, a terminal multiplexer) that would provide basic statistics like 5-minute load average in...
View ArticleEdge router ignoring valid routes as Martians
Hi,my edge routeur is rejecting valid routes:Sep 24 19:29:46 rt1-mit BGP[803]: BGP-4: X.X.X.X-Outgoing [FSM] NLRI: Martian Unicast NLRI (128.0.106.0/24), Ignoring...Sep 24 19:29:46 rt1-mit BGP[803]:...
View Articleipv6 router-advert name-server RDNSS help?
Does anyone have this option working? I'd like to set my own nameserver information for my local lan (ignoring what my ISP sets). This works well for IPv4 (clients get nameserver from dhcp), but I...
View ArticleAlternate internal and external Remote Management Port
I have an ERL3 and we all know the management port is HTTPS/ port 443. I know how to enable WAN access on the same port but that would conflict with our SSL webserver on same wan port. How can I...
View ArticleQuestions about IP addresses
I'm switching from my Apple router to an Edgerouter PoE. I'm. It a tech so I'm a bit uneasy. My old router was set to assign IP's in a particular range. The router was 10.0.1.1 and an IP range was...
View ArticleLosing link
I have set up an open VPN between 2 EdgeMax routers. But they do not stay up. Any ideals on what would cause them to lose the link? And what is the best way restart them? Right now I have to restart...
View ArticlePPPoE Internet setting
Hello there,I am helping a friend setting up his small studio.We have an EdgeRouter PoE, 5 portsHe has fiber optic cable subscription which use Username and Password, and the connection type is...
View ArticleBad Port on 24 EdgeSwitch Lite
Port 19 on my 24 port EdgeSwitch Lite has a green light that stays on when nothing is plugged into it but power. When I plug something in to it it just blinks every once in a while. I have tried...
View ArticleConfigure dnsmasq to avoid DHCP address assignment
Hi all, I’m trying to block the assignment of an IP address to a given MAC. As far as I know, since 1.9, you can use dnsmasq for this. This is the command that I used set service dhcp-server...
View ArticleClik here to view.
Configure EdgeRouter X as switch with VLANs
hello, As in title I have an extra ERX and i want to add it to my existed network to add more UAP pro :-my topology is:-1- huawei 4g modem for Internet .which is connected to eth0 ip 192.168.11.1 2-...
View ArticleERLite 3 - a few questions before buying
Hello everyone, I am currently considering buying an ERLite-3 (+ a small manageable switch) in order to implement network segmentation at home. However, I want to validate that every feature I need...
View ArticleEdgerouter x no wan + 4 Lan wizard?
Why is there no option for the edgerouter x to have a wan + 4 Lan. Surely this is a common setup seeing as the router has 5 ports!I ran the wan+2lan2 wizard which have me a wan and 2 lans, then on the...
View ArticleTraffic Analysis not showing some traffic?
I have an ER-X and this morning, I was streaming NFL though the Plex NFL gamepass channel. I was curious what the bitrate I was getting and whent to my ER-X traffic analysis page. To My dismay, when...
View ArticleREST API?
Hey all, Is there any REST API or similar to automate some aspects of the router? Given its powerful capabilities, it would be nice if I could automate some things, for example, sometimes I want to...
View Article