Hi All,
So I was quite happy with my little EdgeRouter X working silently for 4 months straight after initial configuration. Yesterday I had some WiFi problems which I could not solve, so I thought to myself: "there is a new firmware for the router, let's upgrade, maybe it will help, and if not at least I will be running the newest one"
A couple of clicks later I downloaded ER-e50.v1.9.0.4901118.tar file from https://www.ubnt.com/download/edgemax/default/default/edgerouter-er-xer-x-sfpep-r6-firmware-v190 and applied it through the web GUI. It told me that the router now needs to restart to finish the process, so I clicked OK to that and it never came back...
I gave it maybe 30 minutes to finish the process, the power light was green, and ports where cables were plugged in were blinking green as well. I powered it down and started it again, but it did not change anything.
Since then I tried to reset it a couple of times by pressing the reset button while turning on the router. It does what it is supposed to (last LED starts blinking and becomes ON and then OFF), but the router does not respond to anything.
When I plug in a cable to one of the ports (tried all) the LED is blinking as if there was traffic, but GUI is not accessible at 192.168.1.1 and it does not even respond to ping on that address.
Any ideas what else I can try?