Hurricane Electric /48 tunnel
Does anyone have any sample configs for an HE /48 tunnel? I've looked around but can't find any and am would like to have a reference before I start my configuration since I have my /64 working and...
View Article1.8.0 DPI has started marking almost everything SSL/TLS or Web - Other
I had firewall rules blocking both streaming media and adult sites and they seem to have just stopped working. Looking at the Traffic Analysis page the DPI engine seams to have suddenly become DUMB.....
View ArticlePort Forwarding help for a newbie
Hey folks, I have a home automation app that previously had no issues connecting to LAN on my tomato router. Now switching to EdgeRouter X v1.8.0, I can use the app when connected to LAN via WIFI, but...
View ArticleEdgeRouter PPPoE configuration help
Hi All,I have got Edgerouter Lite which I got about 6-7 months ago and just now taking out of the box to try with my ISP. I am trying to configure to work with PPPOE connection and obviously I am...
View ArticleNull routing vs. Firewall rules - which has better performance?
I have a standard network group that I filter traffic entering my networks from that should not be routed on the internet (from various RFCs) including RFC1918 (which I am using internally). Is there...
View ArticlePPTP through an EdgeRouter - protocol 47 not making it to the subnet
I have an EdgeRouter (Lite 3port) configured with three interfaces - eth0 is the WAN, eth1 is a public subnet provided by the ISP, and eth2 is a private LAN. I've removed all the firewall rules. I do...
View ArticleForwarding port 80 of WAN
I've ran below so I can access my GUI from the switch and WAN. configure delete service ssh listen-address delete service gui listen-address commit save exitI ultimately want to set up the following...
View ArticleComcast IPv6 and Vlans
Hello,I have an EdgeRouter X and am trying to get Comcast IPv6 working over multiple vlans. I get IPv6 internet connectivity if my traffic is untagged/on vlan 1 but lose it once my workstation is back...
View ArticleER Lite reboots at 6:25AM every day
My ER Lite running 1.8 reboots every morning. /var/log/messages gets wiped out. The customer says the Internet also goes down around 1:30 every day. Anybody have experience with this? Thinking of...
View ArticleUnable to update to firmware v1.8.0
I have been trying to update to firmware v1.8.0 on my edgerouter lite via gui and cli with failed results. The gui shows failed upload in both Chrome and Firefox. I have also restarted the router...
View ArticleClik here to view.
ERL + Dual WAN + OpenVPN policy routing : Any tips / critiques are welcome!
Good Morning All, I am the proud owner of an EdgeRouter Lite which is running EdgeOS 1.8. Its amazing!! With the help of the config examples and posts on this forum, I was able to get my beta setup up...
View ArticleDns
I want clients in LAN to use my Edge router DNS, and therefore block other requests on udp 53. I have put up a FW rule, WAN is on ETH1 and LAN is on ETH0:I add rule on ETH0/IN:Action: RejectProtocol:...
View ArticlePlaned to add more horse-power to ER-Pro Series?
Hi! We are using only EdgeMax Pro Series in our Network but we now reach a point where we wish to have more power for our routing equipment. First topic: Currently there are very cheap SoCs on the...
View ArticleL2TP VPN: Only allow specific public IP to use the tunnel?
Hello again, everyone. So, I can successfully configure an L2TP over IPSec VPN tunnel using the guide online. The only practical purpose I have for doing this is that I work an hour away from our...
View ArticleI am sure I am missing something simple here...
New to this. I have an EdgeMax Lite running EdgeOS 1.8. Eth0 is configured 192.168.1.254 and is connected to a LAN that has my Internet router on it.Eth1 is configured 192.168.2.1Eth2 is configured...
View ArticleHelp configure ER lite (from a newbie)
Hello, I need my ER lite to do something relatively simple. I have a group of global static ip addresses which i get from my cable isp. I also have a couple of servers that are running small websites...
View ArticleRouter unreachable after reset
Hello,I have the Edge router lite since 2 years and it's really great !I use a really simple conf, just 1 LAN, 1 dhcp and a PPPoE WAN connexion with some VLANs.Today I had to reboot for reasons, so I...
View ArticleTraffic shaping/Throttling on EdgeSwitch
I have an EdgeSwitch 24-Port running firmware 1.3.0. Then, port 24 on it is connected to an EdgeRouter which is then connected to my Comcast link. (There's also an UAP that's connected to the...
View ArticleRules handling on holidays
Hiany idea how to handle rules dependend on holidays?My requirement: SUN-THU Internet access should be blocked for my kids at a given time - say 9 pm. FRI-SAT it is allowed until 11pm. Currently this...
View ArticleDifferent DNS forwarding from different subnets - OpenDNS
I have two VLAN/Subnets set up - one for normal traffic and one for the kids. The kids subnet I want to force all DNS requests to OpenDNS. Is there any way to have two DNS forwards set up listening on...
View Article