New to this.
I have an EdgeMax Lite running EdgeOS 1.8.
Eth0 is configured 192.168.1.254 and is connected to a LAN that has my Internet router on it.
Eth1 is configured 192.168.2.1
Eth2 is configured 192.168.3.1
The route table shows the connected networks 192.168.1.0/24, 192.168.2.0/24 and 192.168.3.0/24.
I can ping interfaces on the same subnet, but I can't ping anything on a different interface on the EdgeMax. For example, on a computer connected to Eth1 that has a static IP address of 192.168.2.200, I can ping 192.168.2.1 but not 192.168.1.2, 192.168.1.1 or 192.168.3.1. Similarly from a computer connected to the LAN on Eth0, I can ping 192.168.1.254 but not anything on Eth1 and Eth2.
I do not have NAT configured (but I suspect that I need it to be configured - I just can't figure out how).
Any help would be appeciated.
thanks,
bruce