noip DDNS with 2 WANs

Good day all...

I am using 2 WAN connections, load balanced, the DDNS update in GUI (checked the CLI, the same) is for pppoe0 only. I noticed in noip site that the IP is for pppoe1.

1. I did change the config to pppoe1 and back to pppoe0 just to make sure nothing is stuck. It did update for pppoe1 and then for pppoe0 successfully.

2. after a while, the IP changed to pppoe1 IP, checked the config again, it is pppoe0 (GUI and CLI).

I am using 1.8.5, ER-Pro



set service dns dynamic interface pppoe0 service dyndns host-name XXXX.noip.XXXX
set service dns dynamic interface pppoe0 service dyndns login XXXX
set service dns dynamic interface pppoe0 service dyndns password XXXX
set service dns dynamic interface pppoe0 service dyndns server dynupdate.no-ip.com
set service dns dynamic interface pppoe0 web dyndns