2nd Lan - Edge Router 8 Port

Hi All,

Bit of a newbie to Ubiquiti so hoping someone can help.  :-0

I have set up my ER 8 using the WIzard - Everything is working well.  (Using Load Balance Wizard)

eth0 = wan1 (Static Addres from ISP) 92.xxx.xxx.xxx

eth1 = wan2 (Failover link) (80.xxx.xxx.xxx)

eth2 = Lan1 (192.168.11.0/24)

DHCP Server 192.168.11.0/24

I want to use eth6 as a second LAN (192.168.50.1/24) and create a DHCP server to provide addresss to the 192.168.50.1 LAN.

I have allocated eth6 and address of 192.168.50.1/24

I have created a DHCP server in the same subnet 192.168.50.0/24

The Problem - When I plug into eth6 the router does not allocate an address..

Can anyone advise where this newbie has gone wrong?

Thanks

"Feeling very Dumb" Steve

Edge Router Pro V1.8.0