A friend and I recently purchased two EdgeRouter X systems with the purpose of setting up a site-to-site IPSec VPN to sync data between our houses (poor man's offsite backup, but it works for us). We've been able to sucessfully setup the tunnel with the information found on the support pages (through the GUI, I haven't touch any routing with CLI in years so I've forgotten any and everything I learned previously). The problem we are running into is we can see the tunnel is up, but we cannot access the other side of the tunnel. I had this working before we got the ERX systems with PFsense and had to setup NAT rules and static routes but I having problems determining what we need to have setup to get access. We mostly will be using HTTP and SMB/CIFS protocols across the tunnel but ideally would like any protocol available. Please be specific if you have any sugguestion with CLI because I'm somewhat lost when in the command line.
↧