Hi All,
I hope for some newbie support. - Im trying to make a simple VPN:
I did install the router with a simple default Wizard setup and the the internet is now working, but need to setup the VPN now. but howto?
My site setup:
Internet port on (eth0) with Static IP and No firewall
WAN IP Add. : 123.123.123.123
Gateway: 123.123.123.124
Subnet :255.255.255.252
DNS1: 194.239.134.83
DNS2: 193.162.153.164
LAN port (eth1)
Add: 192.168.1.1 / 255.255.255.0
DHCP : ON
-----------
How the fun part for some of you net admins.
This is the VPN data i do have to setup the EdgeRouter ER3-lite 1.8 on My site.
My site: Subnet: 172.17.71.0/24
My site: WAN IP: 123.123.123.123
Remote VPN site: Remote Network: 192.168.2.0/24
Remote VPN site: WAN IP: 11.22.33.44
Phase 1
Negotiation Mode: Main
Encryption: AES192
Authentication: SHA
Key Group: DH1
SA Life Time: 28800
Dead Peer Detection: yes
Pre-Shared Key: xXxXxXx
Phase 2
Active Protocol: ESP
Encapsulation: Tunnel
Encryption: AES192
Authentication: SHA
SA Life Time: 28800
Perfect Forward Secrecy: none
Nailed Up: yes
----
I hope some of you can help me with a simpe step by step guide or help to make this happen.
Thanks
BG
/Meg