I am not sure if this is the forum for this post, if there is a better one and admin need, please feel free to move it.
I know there are some reported problems with the dashboard, about stops working properly in some cases. Some people workaround clearing all browser data, and some people using another browser: Chrome its reportes works ok.
In our case, only can work with firefox. When the problem was appeared, we just start to clearing all browser and re-signin to dashboard then it works ok again. But we have encountered a new problem, which may be of interest to those who are working on this issue solution.
Here the case:
0. erpoe5 are links on eth3 and etc5 in switch0, no cable attached to eth0 no inet link.
1. from admin pc connected to switch0 lan, we can signin on dashboar and all works proplery.
2. logout / clear all browser data
3. connect cable to eth0 and we've inet link and for example web browsing working ok (seem router works ok)
4. from admin pc connected to switch0 lan, we can signin on dashboar and now do NOT works properly.
5. logout/ clear all browser data
6. deatach eth0 cable, no inet link.
7. from admin pc connected to switch0 lan, we can signin on dashboar and AGAIN works proplery.
I repeted several times with the same result: always we have eth0 connected, dasboards no works; but when eth0 cable is deatached, dasboard starts working again.
I don't know why happens, It is not a browser problem ... I'll try to restore factory and reload current config, because I think is somes problem on management sessions on router ligthttpd service or something similar ...
Thanks