Hi All,
I'm quite new to Ubiquiti products, so I describe situation and may be someone will be able to help.
1. Purchased one EdgeRouter PoE with 5 ports and one PicoStation M2HP.
2. Connected and updated both of them to latest firmware available from download section. PicoStation is connected to router using PoE.
3. Made confirguration according to manual https://help.ubnt.com/hc/en-us/articles/205197660-EdgeMAX-SOHO-Example
4. Configuration start to work fine and it's worked for 2 days. In the environment there were only WLAN connections (no any wired LAN)
5. After 2 days suddenly WiFi network from PicoStation disappeared. When checked the station it appeared without any power. Checked router and saw that there is no PoE on ETH 3 port, despite there was power 1 minute ago.
6. Tried the following:
- connect to router using existing IP settings - Unsuccess - simply no response from router
- reset router in runtime by pressing reset button - simply nothing happend no LED blinking no nothing. Only console port has green LED on.
- "Power-on" reset - simply nothing happened no LED blinking, no nothing
- tried accessing to 192.168.1.1 - same thing, no any response.
Could anyone make any suggestions. As I have brand new Qubiquiti router hardware which is a brick now...