Can I setup this router via GUI or do I need to learn CLI
Current Config for IPSEC VPN that I would need to configure.
IKE Policy
Policy Name:
XXX-CISCO
Exchange Mode: Main Aggressive
Authentication Algorithm:
Encryption Algorithm:
DH Group:
Pre-shared Key:
XXXXXXXXXXXXXXXXXXX
SA Lifetime:
28800
seconds (60-604800)
DPD: Enable Disable
DPD Interval:
10
seconds(1-300)
IPSEC Policy Settings
Policy Name:
XXX-CISCO
Local Subnet:
192.168.0.0
/
24
Remote Subnet:
192.168.1.0
/
24
Remote Gateway:
XX.XX.XX.82
(IP or domain name)
Exchange Mode: IKE Manual
Security Protocol:
Authentication Algorithm:
Encryption Algorithm:
IKE Security Policy: Click here to add IKE list
PFS Group:
Lifetime:
28800
seconds (60-604800)
Status:
List of Security Association
ID Name SPI Tunnel Initiator Tunnel Receiver Security Protocol AH Auth ESP Auth ESP Encr
1 XXX-CISCO 2336605813 xx.xx.xx.218 XX.XX.XX.82 ESP -- SHA1 AES128
2 XXX-CISCO 47830939 xx.xx.xx.82 XX.XX.XX.218 ESP -- SHA1 AES128