Hello all,
I have been having trouble forwarding my port 80 to my Snyology NAS webserver. I finally got it to work and can successfully navigate to the external IP from outside my network. However, when I attempt to do so inside it simply takes me to the Edgemax router login page.
I have the Enable Hairpin Nat checked but not sure what else I can do.
Any suggestions?
Here is my config:
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action accept
destination {
port 80
}
log enable
protocol tcp
}
rule 30 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 30 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
traffic-policy {
out UpStream
}
}
ethernet eth1 {
address 192.168.1.1/24
description LAN
duplex auto
redirect ifb1
speed auto
traffic-policy {
out DownStream
}
}
ethernet eth2 {
address 192.168.2.1/24
description WLAN
duplex auto
speed auto
}
input ifb1 {
traffic-policy {
out UpStream
}
}
loopback lo {
}
}
port-forward {
auto-firewall enable
hairpin-nat enable
lan-interface eth1
lan-interface eth2
wan-interface eth0
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN1 {
authoritative enable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.38 {
stop 192.168.1.243
}
}
}
shared-network-name LAN2 {
authoritative enable
subnet 192.168.2.0/24 {
default-router 192.168.2.1
dns-server 192.168.2.1
lease 86400
start 192.168.2.38 {
stop 192.168.2.243
}
}
}
}
dns {
forwarding {
cache-size 150
listen-on eth1
listen-on eth2
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 1 {
description "Port 80"
destination {
group {
}
port 80
}
inbound-interface eth0
inside-address {
address 192.168.1.128
port 80
}
log disable
protocol tcp
source {
}
type destination
}
rule 5010 {
description "masquerade for WAN"
outbound-interface eth0
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
upnp {
listen-on eth1 {
outbound-interface eth0
}
}
}
system {
host-name ubnt
login {
user teamjb {
authentication {
encrypted-password ****************
plaintext-password ****************
}
level admin
}
}
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
traffic-analysis {
dpi enable
export enable
}
}
traffic-control {
}
traffic-policy {
shaper DownStream {
bandwidth 30000kbit
class 50 {
bandwidth 90%
ceiling 100%
description PS4
match ADDR {
ip {
destination {
address 192.168.1.127/32
}
}
}
priority 7
}
default {
bandwidth 90%
ceiling 100%
}
description "DownStream QoS"
}
shaper UpStream {
bandwidth 5000kbit
class 50 {
bandwidth 95%
ceiling 100%
description PS4
match ADDR {
ip {
destination {
}
source {
address 192.168.1.127/32
}
}
}
priority 7
}
class 100 {
bandwidth 40%
ceiling 100%
description "Plex Remote"
match ip {
ip {
destination {
port 32400
}
}
}
priority 5
}
default {
bandwidth 95%
burst 15k
ceiling 100%
queue-type fair-queue
}
description "Upstream QoS Policy"
}
}Thanks for any help you can offer!