Greetings,
I have deleted a VIF configuration but it still shows up in the show interfaces commands. The only way I can clear it is to reboot. This is causing a problem with reprovisioning the same vlan/VIF. Is this a known issue or did I miss something?
Below are some show commands, in thid cas I removed vif with vlan ID 102.
Thanks,
ubnt@ubnt-01:~$ show version
Version: v1.8.0
Build ID: 4853089
Build on: 02/19/16 16:07
Copyright: 2012-2015 Ubiquiti Networks, Inc.
HW model: EdgeRouter Lite 3-Port
HW S/N: 44D9E79E494A
Uptime: 18:28:40 up 21 min, 1 user, load average: 0.20, 0.18, 0.22
ubnt@ubnt-01:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 10.0.0.1/24 u/u Internet
eth1 10.0.25.2/24 u/u MGMT
10.0.25.1/24
eth2 - u/u
eth2.101 10.0.101.2/24 u/u
10.0.101.1/24
eth2.102 10.102.1.3/24 u/u t9999_102
lo 127.0.0.1/8 u/u
::1/128
ubnt@ubnt-01:~$ show configuration commands | grep 'vif 102'
ubnt@ubnt-01:~$ show configuration commands | grep 102
ubnt@ubnt-01:~$
