I'm having issues with slow internet speeds on my ERL. I'm on a 100x6 cable line. If I connect directly to the cable modem, I can get around 90-110 down, constantly 6 up. Once I have the cable modem connected to the ERL, speeds vary from 20 to 60 down.
Any ideas?
Config is below:
firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name WAN_IN { default-action drop description "WAN to internal" rule 10 { action accept description "Allow established/related" state { established enable related enable } } rule 20 { action drop description "Drop invalid state" state { invalid enable } } } name WAN_LOCAL { default-action drop description "WAN to router" rule 10 { action accept description "Allow established/related" state { established enable related enable } } rule 20 { action drop description "Drop invalid state" state { invalid enable } } } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable } interfaces { ethernet eth0 { address 192.168.1.1/24 description Local duplex auto speed auto } ethernet eth1 { address dhcp description Internet duplex auto firewall { in { name WAN_IN } local { name WAN_LOCAL } } speed auto } ethernet eth2 { address 192.168.2.1/24 description "Local 2" duplex auto speed auto } loopback lo { } } service { dhcp-server { disabled false hostfile-update disable shared-network-name LAN1 { authoritative disable subnet 192.168.1.0/24 { default-router 192.168.1.1 dns-server 192.168.1.1 lease 86400 start 192.168.1.21 { stop 192.168.1.240 } } } shared-network-name LAN2 { authoritative disable subnet 192.168.2.0/24 { default-router 192.168.2.1 dns-server 192.168.2.1 lease 86400 start 192.168.2.21 { stop 192.168.2.240 } } } } dns { forwarding { cache-size 150 listen-on eth0 listen-on eth2 } } gui { https-port 443 } nat { rule 5010 { outbound-interface eth1 type masquerade } } ssh { port 22 protocol-version v2 } } system { host-name ubnt login { user ubnt { authentication { encrypted-password **************** } level admin } } ntp { server 0.ubnt.pool.ntp.org { } server 1.ubnt.pool.ntp.org { } server 2.ubnt.pool.ntp.org { } server 3.ubnt.pool.ntp.org { } } offload { ipv4 { gre enable pppoe enable vlan enable } } syslog { global { facility all { level notice } facility protocols { level debug } } } time-zone UTC }