ERL on 1Gbps Fiber - Download 20mbps / Upload 1gbps

So I have been struggling with this today and am getting no where. Not exactly sure what is going on but I can not get around this issue at all. No matter what I do I always get 20Mbps down and 1Gbps up to the ERL. If I plug into my PC its a full 1Gbps Down and Up so the circuit looks good. Any help would be great, thanks!

 firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
:
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 1 {
action accept
log disable
protocol all
state {
established enable
invalid disable
new disable
related disable
}
}
rule 2 {
action drop
description Invalid
log disable
protocol all
state {
established disable
invalid enable
new disable
related disable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 10.168.2.1/23
description Local
duplex auto
speed auto
}
ethernet eth1 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
}
ethernet eth2 {
address 192.168.10.1/24
description "Local 2"
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN {
authoritative disable
subnet 10.168.2.0/24 {
default-router 10.168.2.1
dns-server 10.168.2.200
dns-server 8.8.8.8
lease 86400
start 10.168.2.10 {
stop 10.168.2.50
}
}
}
use-dnsmasq disable
}
dns {
forwarding {
cache-size 150
listen-on eth0
listen-on eth2
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
outbound-interface eth1
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
}
system {
host-name ubnt
login {
user j3rm {
authentication {
encrypted-password ****************
plaintext-password ****************
}
full-name "Jeremy M"
level admin
}
user ubnt {
authentication {
encrypted-password ****************
}
level admin
}
}
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
hwnat disable
ipv4 {
forwarding enable
vlan enable
}
ipv6 {
forwarding enable
vlan enable
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
}