Unable to get Internet on ETH1. New setup

Hey everyone,

I just got the EdgeRouter Lite and I setup using the wizard. I used WAN+2LAN2...

I have internet plugged into ETH0, and unmanaged switch(about 10 clients) into ETH1 and a Ubiquiti Wireless in ETH2.

The ETH2 port/ aka my wireless works perfect... I can surf the net and login to the router.

ETH1 Doesnt work at all, I cannot get online and I cannot ping the router from any device on that connection. What am I missing here? The devices get an IP address from the router but no internet and cannot ping the router.

Config:

firewall {
    all-ping enable
    broadcast-ping disable
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians enable
    name WAN_IN {
        default-action drop
        description "WAN to internal"
        rule 10 {
            action accept
            state {
                established enable
                related enable
            }
            description "Allow established/related"
        }
        rule 20 {
            action drop
            state {
                invalid enable
            }
            description "Drop invalid state"
        }
    }
    name WAN_LOCAL {
        default-action drop
        description "WAN to router"
        rule 10 {
            action accept
            state {
                established enable
                related enable
            }
            description "Allow established/related"
        }
        rule 20 {
            action drop
            state {
                invalid enable
            }
            description "Drop invalid state"
        }
    }
    receive-redirects disable
    send-redirects enable
    source-validation disable
    syn-cookies enable
}
interfaces {
    ethernet eth0 {
        address dhcp
        description Internet
        duplex auto
        firewall {
            in {
                name WAN_IN
            }
            local {
                name WAN_LOCAL
            }
        }
        speed auto
    }
    ethernet eth1 {
        address 192.168.1.1/24
        description Local
        duplex auto
        speed auto
    }
    ethernet eth2 {
        address 192.168.2.1/24
        description "Local 2"
        duplex auto
        speed auto
    }
    loopback lo {
    }
}
service {
    dhcp-server {
        disabled false
        hostfile-update disable
        shared-network-name LAN1 {
            authoritative enable
            subnet 192.168.1.0/24 {
                default-router 192.168.1.1
                dns-server 192.168.1.1
                lease 86400
                start 192.168.1.38 {
                    stop 192.168.1.243
                }
            }
        }
        shared-network-name LAN2 {
            authoritative enable
            subnet 192.168.2.0/24 {
                default-router 192.168.2.1
                dns-server 192.168.2.1
                lease 86400
                start 192.168.2.38 {
                    stop 192.168.2.243
                }
            }
        }
    }
    dns {
        forwarding {
            cache-size 150
            listen-on eth1
            listen-on eth2
        }
    }
    gui {
        https-port 443
    }
    nat {
        rule 5010 {
            outbound-interface eth0
            type masquerade
            description "masquerade for WAN"
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
}
system {
    host-name ubnt
    login {
        user admin {
            authentication {
                encrypted-password $6$HJTKoK9CL5uHJ8NQ$7meNcne1TpinMamlbkbwhVwv8/Wl0DkJHer1lz2PXFpb7iO5dqbw69zsr63kjN/tsOF0dEe7BQSWc3SubXSP4/
            }
            level admin
        }
    }
    ntp {
        server 0.ubnt.pool.ntp.org {
        }
        server 1.ubnt.pool.ntp.org {
        }
        server 2.ubnt.pool.ntp.org {
        }
        server 3.ubnt.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
    time-zone UTC
}


/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:conntrack@1:cron@1:dhcp-relay@1:dhcp-server@4:firewall@5:ipsec@5:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:ubnt-util@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.8.5.4884695.160608.1057 */

Thanks for any help I have been trying things non stop for about 4 hours now and I cannot figure out whats wrong.