Needed new gear due to age and problems of the home network. Wireless - Linksys WAP54gv2 replaced by Unifi AP AC Pro. Had to keep resetting the Linksys by getting ladder to remove power and force a reboot. It had the latest firmware update which were quite old. Then the next item needing replacement was the router/switch, a D-Link DI-604, It was capping our bandwidth at 40 M even though we were suppose to get 60 M down speed. So the purchase of the EdgeMax EdgeRouter PoE 5. First I update the firware to 1.8.5, Then used the wizard Wan+2Lan to setup the router.
Speed down now is 74 M, up speed has dropped from 10 m down to 4 M.
Thing work but have questions.
1st - Why did the wizard set the lan to 192.168.0.38-243, what happen to seeing the normal 192.168.0.0/24 being 192.168.0.1 - 192.168.0.255 with the first and last being reserved (gateway/broadcast).? This is causing problems with gear (printers and other devices) out side that range(the .2 -.37 and the .244 - .254)
Can I fix that manually?