L2TP w IPsec and Iphone 6
Hi, I configured the edgerouter as a VPN server with L2TP w/IPsec. I'm able to connect my Iphone to the VPN but the ESP encryption algorithm is only AES128/SHA1. I would like use AES256/SHA256 and I...
View ArticlePolicy based routing for specific ports
I am trying to utilize an openvpn connection to be used only when traffic is using specific ports. I have found several different topics on the subject, each with different solutions. Below is my...
View ArticleAdd VLAN tagging to Load-balance wizard?
I see in 1.9.0 that there is now a VLAN tagging field for the Basic wizard. However, would it also be possible to add this option to the two Load-balancing wizards as well?
View ArticleER-X Vlan DHCP server end range command
Following certain instructions on this page to set up a vlan 20. However I can't find this commandset service dhcp-server shared-network-name vlan4 subnet 192.168.4.0/24 end 192.168.4.254...
View ArticleClik here to view.
EDGEPOINT config!!!!
Hello, I write from Argentina and I am using Google translator.I want to upgrade my network. I am interested in using a "edgepoint" cables to simplify my communications tower.Currently, each device has...
View ArticleMikrotik fiber cables
Hi https://routerboard.com/SplusDA0001 are there some who have tried them here in an ER-X SFP and the ES 8 150w and on to an ES 24 LITE there must be fiber between all devices / Flemming
View ArticleEdgeRouter Pro Hairpin Issue with Intervlan Routing on EdgeSwitch
Hello Everyone, Im having a heck of a time getting Hairpin Nat to work as expected.My Setup is Using an ER-Pro with eth7 (SFP) connected to my 24 port EdgeSwitch as a trunk line for internet.I have an...
View ArticleEdgeOS (ER-X) IPsec & IKEv2 Feature Requests
I, within the past month, bought myself an EdgeRouter X because it was a great price for such a wonderful router, so I wanted to say thank you very much Ubiquity for such a great and low cost but...
View Articlefirewall question: drop invalid rule order
Some networking folks on IRC are saying we should always drop invalid first before allow est/rel. Many examples here have invalid at the bottom. Can any pro shed some light on this?
View ArticleWAN_IN vs WAN_LOCAL difficulty understanding.
I've searched many previous topics on this but i still have difficulty understanding Can somebody share typical examples on where we should apply rules? It DOES seem that WAN_LOCAL is where we should...
View ArticleEdge Router Pro Firewall
How to configure firewall to drop all LAN and accept only some IPs? Example: DROP 192.168.1.0/24, ACCEPT 192.168.1.10, 192.168.1.11, 192.168.1.20, 192.168.1.21, 192.168.1.100. Where can I find...
View ArticleEdge Router Pro 8 LAN
How can I configure eth3 and eth4 ... for different LAN eth2?Example: 192.168.1.1 eth2, eth3 192.168.2.1, 192.168.3.1 eth4 ... Edge Router Pro 8 FailOver, firmware 1.9.0.
View ArticleIPv6 dhcp
Hello Everyone,I am trying setup prefix-delegation for DHCPv6 and on client I see error in debug log 793 Aug/13/2016 18:23:35 memory dhcp, debug, packet recv client: ether1-gateway...
View Articlerouter load
I'm trying to debug something and looking for some diagnostic info... specifically for ERXs. * In the web UI, what does the CPU meter measure? Is it the CPU alone, or does it also include the network...
View ArticlePPPoE Connection (with VLAN Tag) - Dynamic DNS returns "noconnect" on pppoe,...
I have a EdgeRouter, and I used the "Basic Setup" wizard to configure a PPPoE connection on eth0. I'm trying to setup a Dynamic DNS service using DynDNS, via the GUI. This is the output: ubnt@ubnt#...
View ArticleTwo EdgeMAX PoE5s, one DNAT works , the other one DNAT does not work.
Have two PoE5s, identical configurations, router A and router B. configured router A firewall/NAT to forward port to internal server using DNAT and firewall rules. It works, I have Internet...
View ArticleCan Traffic Analysis work when setting up ER-X as a simple layer-2 switch?
I tried setting up ER-X as switch via Setup Wizards, using firmware 1.9.0, but could get Traffic Analysis function working. By using WAN+LAN configuration it works. Is it a limitation or did I miss...
View ArticleWill this work? 3 WANS
I want to send 3 WANs from one location to another then disperse them between customers evenly. This is how my setup will work and I'm wondering if I need to change anything and would really appreciate...
View ArticleAndroid Device cannot connect to internet?
My setup is anEdgemax router -> My PCport 0 -> modemport 1 -> wifi router 1port 2 -> wifi vpn routerport 3 -> My PCport 4 -> N/A So i get internet on my pc from all ports/routers. I...
View Article