hello,
i started to believe that ubiquitis edgemax routers have serious issues with speed negotiation.
So here is the story:
We bought a ERPoe-5 to power 5 antennas.
Because of low bandwith needs we realized after a year that most of the ports worked at 10 mbit speed instead 100
and also our last powerbeam antenna worked at 100mbit instead 1000mbit.
We changed cables but nothing.
So we decided last week to buy a new EdgePoint Router 6-Port and installed it.
Exactly after the installation , we checked the speed of all ports and the situation was a mess.
Even with a new litebeam ac antenna with a new cable , the speed was 100mbit instead 1000.
By the way the issue diassapear after a restart , and come again back after 24-48 hours.
So i need a very serious explanation from ubiquiti, because after hours of working on 20 m antenna , and hours seeking the low bandwith problems, and so on, HEY ubiquiti GUYS its not a JOKE, are you control your chip suppliers and/or ?
I wish to be totally wrong and to apologise, i really want it.
So here is the hardware :
1.rocket m5
2.litebeam ac
3.powerbeam m5
4.nanobridge m5
5.powerbeam m5
what we have done
we used pachcords
EQUIP 825460 ECO PATCHCABLE U/UTP 1M YELLOW CAT.5E
now we are using cat6 handmade
we cleaned all the antennas ports (except the new litebeam)