ER-X Traffic Shape Help need

Hello,

I recently was helped to setup a Vlan on a ER-X.

I setup Vlan100 and Vlan200. 

Vlan100 is on eth1 and Vlan200 is on eth2, and both trunks to eth4.

ER-X local                                                                                         ER-X remote

Eth1---Vlan100-----                                                                        ------ Vlan100----Eth1

                          |------ Eth4 ---- AirMax <<>>> AirMax ---- Eth4------|

Eth1---Vlan200-----                                                                        --------Vlan200 ---Eth2

Now I need to shape the traffic for this two Vlans. I have see some configurations at the forum but not sure if it will work for me.

My total bandwidht (wireless link) is around 5mbps.

I would like to setup Vlan100 to have high priority and 4mbps U/D traffic

while having the Vlan200 to have =< 1mbps U/D, 1mbps max limit.

 Could someone script the CLI for me...?  Or the GUI steps.