So, here is my situation.
ISP brought Fiber into their RAD device and gave me a /30 as my WAN.
We'll call it 10.10.10.200/30 with .201 being their RAD device and .202 being my WAN.
Then they gave me my static IPs which we'll call 11.11.11.168/29 with .169-.174 being usable.
They said I need to put in a router to handle this and a switch after the router which should then give me my IPs to use on my devices.
I've configured an ERL with 10.10.10.202/30 as my eth0, .201 as the GW and 11.11.11.169/29 on eth1. This works and I have get out using .170 - .174 as my IP, however, everything I do shows I'm coming from 10.10.10.202. My quesion is, what am I missing to get the traffic to come from their respective IPs?
I've never had to build an edge device between an ISPs fiber and my equipment before, they've always provided it. Thanks for any help you guys can provide.