QoS is fairly complex I'm finding out. I need some help. How would I go about doing the following on my EdgeMAX running 1.9.1? Here are my interfaces:
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 <external IP>/19 u/u Internet
eth1 192.168.100.1/24 u/u DMZ
eth2 - u/D Unused
eth3 - u/u LAN (UniFi AP)
eth4 - u/u LAN (Wired)
lo 127.0.0.1/8 u/u
::1/128
switch0 192.168.4.1/24 u/u LAN (Switch)
vtun0 10.10.10.1/24 u/u Open VPN Server
My router is running as a DHCP server and I have static reservations for all clients on my network. 192.168.4.0/24 is the subnet where all my devices which I wish to QoS reside.
192.168.4.95 - Limit internet upload to 2mbit
192.168.4.82 - Limit internet download to 0.25mbit
192.168.4.83 - Limit internet download to 0.25mbit
After reading this:
https://help.ubnt.com/hc/en-us/articles/216787288-EdgeMAX-Quality-of-Service-QoS-
I'm confused on which method I should use. Can anyone point me in the right direction?
