Hello,
I have the ERL with version 1.9
Tried to setup an BGP to my server as follow:
toli@gate# show bgp bgp 4242420007 { neighbor 172.23.80.1 { remote-as 4242420007 soft-reconfiguration { inbound } update-source 172.23.80.1 } } [edit protocols]
root@gate:/home/toli# top -b -n 1 -w 120 -p `pgrep -d',' "bgpd|ribd|nsm"` top - 14:16:32 up 1:10, 2 users, load average: 0.10, 0.16, 0.15 Tasks: 3 total, 0 running, 3 sleeping, 0 stopped, 0 zombie %Cpu(s): 6.0 us, 2.8 sy, 0.0 ni, 86.8 id, 0.1 wa, 0.0 hi, 4.4 si, 0.0 st KiB Mem: 495516 total, 240184 used, 255332 free, 28760 buffers KiB Swap: 0 total, 0 used, 0 free, 119528 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 582 root 20 0 7052 2576 1860 S 0.0 0.5 0:01.05 nsm 587 root 20 0 5712 1908 1464 S 0.0 0.4 0:01.24 ribd 2363 dnsmasq 20 0 5160 1140 792 S 0.0 0.2 0:00.95 dnsmasq root@gate:/home/toli# vtysh -c "s ru bgp" ! root@gate:/home/toli# debug bgp % Protocol daemon is not running [ protocols bgp 4242420007 neighbor 172.23.80.1 update-source 172.23.80.1 ] Warning: IP address 172.23.80.1/32 does not exist on this system [ protocols bgp 4242420007 ] Starting routing daemon: bgpd.
Here is the IP from openvpn
13: vtun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 100 link/none inet 172.23.80.7 peer 172.23.80.1/32 scope global vtun0 valid_lft forever preferred_lft forever
Thanks