Sorry if this has been covered somewhere already.
I have a VZON connection with a copper hand-off - Verizon insists that the port on my equipment be set to 100/full
when set to autoneg the connection is negotiated as 100/half and I get very poor performance on the circuit.
it is a 50mbps circuit and I cannot get more than 2-3 mbps while doing iperf testing.
I tried connecting a laptop directly to the hand-off for testing (set nic to 100/full as directed by carrier)
testing had satisfactory results using iperf.
when I set the erpro 8 to 100/full the ethernet interface did not link.
using the commands
set interfaces ethernet eth1 speed 100
set interfaces ethernet eth1 duplex full
commit
Version: v1.3.0
Build ID: 4605996
Build on: 10/14/13 18:11
Copyright: 2012-2013 Ubiquiti Networks, Inc.
HW model: EdgeRouter Pro 8-Port
Thank you,
~r