Hi!
I'm hoping someone can help me because I've run out of ideas and was probably a little out of my depth in the first place!
I bought an ER-X a few months back, and have never been able to get the same speeds as I can get from my ISP provided router (approx. 60Mbps, vs the ER-X's 30Mbps).
I seem to be running out of articles on Google, so really hoping somebody could shed some light on this? Any suggestions would be very greatly appreciated.
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
modify MOD_PPPOE_OUT {
rule 1 {
action modify
modify {
tcp-mss 1452
}
protocol tcp
tcp {
flags SYN
}
}
}
name PPPOE_IN {
default-action drop
description ""
enable-default-log
rule 1 {
action accept
description "Accept Existing"
log disable
protocol all
state {
established enable
invalid disable
new disable
related enable
}
}
rule 2 {
action drop
description "Drop Invalid"
log disable
protocol all
state {
established disable
invalid enable
new disable
related disable
}
}
}
name PPPOE_LOCAL {
default-action drop
description ""
enable-default-log
rule 1 {
action accept
description "Accept Existing"
log disable
protocol all
state {
established enable
invalid disable
new disable
related enable
}
}
rule 2 {
action drop
description "Drop Invalid"
log disable
protocol all
state {
established disable
invalid enable
new disable
related disable
}
}
}
name PPPOE_OUT {
default-action accept
description ""
}
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
options {
mss-clamp {
interface-type pppoe
mss 1452
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
out {
}
}
pppoe 0 {
default-route auto
firewall {
in {
name PPPOE_IN
}
local {
name PPPOE_LOCAL
}
out {
name PPPOE_OUT
}
}
mtu 1492
name-server auto
password password
user-id user
}
speed auto
}
ethernet eth1 {
description Local
duplex auto
speed auto
}
ethernet eth2 {
description Local
duplex auto
speed auto
}
ethernet eth3 {
description Local
duplex auto
speed auto
}
ethernet eth4 {
description Local
duplex auto
poe {
output pthru
}
speed auto
}
loopback lo {
}
switch switch0 {
address 192.168.1.1/24
description Local
mtu 1500
switch-port {
interface eth1 {
}
interface eth2 {
}
interface eth3 {
}
interface eth4 {
}
vlan-aware disable
}
}
}
port-forward {
auto-firewall enable
hairpin-nat enable
lan-interface switch0
wan-interface pppoe0
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN {
authoritative disable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.38 {
stop 192.168.1.243
}
}
}
use-dnsmasq disable
}
dns {
forwarding {
cache-size 150
listen-on switch0
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
log disable
outbound-interface pppoe0
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
}
system {
host-name smart-ubnt
login {
user somebody {
authentication {
encrypted-password [encrypted password here]
plaintext-password ""
}
full-name "Name"
level admin
}
user someoneelse {
authentication {
encrypted-password [encrypted password here]
}
level admin
}
}
name-server 8.8.8.8
name-server 8.8.4.4
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
hwnat enable
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
}
/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:conntrack@1:cron@1:dhcp-relay@1:dhcp-server@4:firewall@5:ipsec@5:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:ubnt-util@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.9.0.4901118.160804.1131 */Many Thanks,
Jack