Below is my current setup configeration. i can ping the 98.190 number and the 184.188 number from outside the connection. and that computer can ping anything and connect to the outside internet just fine but i need to be about to use the other 12 static 184.188 numbers that have been assined to me by cox and rout them to differance servers. rigjht now all i have configured is the two network eth interfaces and a DHCP server issuing out the other 184.188 numbers so i have a laptop issued with another static number from cox but i can not ping it from outside that network configeration. i just upgraded the firmware on the edge router lite to version 1.9.0 its a 3 port router. i have been trying to figur this out for a while and getting no where any help would be great and appreciated.
i have tried to follow the post from https://community.ubnt.com/t5/EdgeMAX/Multiple-IP-on-WAN-with-two-LAN-NAT/m-p/755942#M25566 but will no luck still can not reach the other static numbers.