Hi,
I need help to configure a edgerouter pro as the schema in attachement.
I have a voip pbx on my network (3cx) and the cisco 1900 is from the telephony company
This pbx must be connected to internet on VLAN 200 (in order to registrate the pbx licence)
But the sip registration must occured on the VLAN 100 on the ip 1.3.5.8.
So normally, all traffics must go to ETH0 but when it try to reach 1.3.5.8, it must go to ETH3.
Can someone explain how to do that on the edgerouteur?
Regars,
Thomas