Hi guys......
I have the following setup ...
Site A:
EdgeRouter Lite with:
IPv4 /30 from the datacenter with static routing for multiple /26's - working perfectly
IPv6 /126 from the datacenter with station routing for a /64 - working perfectly
Site B:
EdgeRouter Lite with:
IPv4 /30 from the datacenter with static routing for multiple /26's - working perfectly
Now, what I would love to be able to do is use the IPv6 addresses from Site A but access them / issue them to servers on Site B's network.
Im not worried about the lag (around 150ms) at this stage.
Site B does not support IPv6, the datacenter said maybe in the future ..... so god knows when that might be.
I have been playing with the HE tunnel broker and I was able to get eth0 (WAN) on the Site B accessable over IPv6 and playing round but I'm not sure how to use the other IP's from the tunnel broker on my LAN side of the Site B network. (there is ZERO NAT on either site) as all machines connected are server's in the datacenters.
I was thinking a IPSec site to site VPN and maybe 'somehow' allowing the /64 to be used locally on SiteA and remotely on Site B
Any ideas / suggestions please you guru's ....
thanks !!