Hello,
as a long time Ubiquiti user and network administrator, I thought that setting up simple VLAN config on new EP-R6 would be easy and 10 sec config, but many hours later Im still stuck.
The layout is simple:
- 1st PBE-AC 500 as P2P client has 2 VLANS (12,13), connected to EP-R6 on eth1
- 2nd PBE-AC 500 as P2P AP relays just one VLAN to other end (VLAN 13), connected to EP-R6 on eth2
- the EP-R6 on eth0 has routed local subnet that connects to sw and users, routing has to be done by EP-R6 because default gateway for that network is on VLAN 12 (different subnet).
Before EP-R6 there was vlan sw for vlan passthrough and mikrotik RB for routing that local network.
How can I setup this, is it even possible with 1.9.0 fw?
All that I did only created some network loops from one VLAN to another (i know - totally weird), or it did not enable VLAN 13 to go from one end to the other.
Thanks
Milos