I am having an issue connecting to the PIA VPN on my Edgemax Lite 3 (my configuration had been previously working).
- It shows that I am connected, but it looks like a generic IP address and not a real one from PIA from the interfaces page. 10.xx.10.xx/32
My log:
Sep 18 18:22:07 ubnt openvpn[17439]: Initialization Sequence Completed
Sep 18 18:22:07 ubnt openvpn[17439]: /sbin/ip addr add dev vtun0 local 10.xx.10.6xx peer 10.37.10.xx
Sep 18 18:22:07 ubnt openvpn[17439]: /sbin/ip link set dev vtun0 up mtu 1500
Sep 18 18:22:07 ubnt openvpn[17439]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sep 18 18:22:07 ubnt openvpn[17439]: TUN/TAP device vtun0 opened
Sep 18 18:22:07 ubnt openvpn[17439]: Options error: option 'route' cannot be used in this context ([PUSH-OPTIONS])
Sep 18 18:22:07 ubnt openvpn[17439]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 18 18:22:07 ubnt openvpn[17439]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Sep 18 18:22:07 ubnt openvpn[17439]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Sep 18 18:22:05 ubnt openvpn[17439]: [c95af85debff29a032e045f2c89d6d74] Peer Connection Initiated with [AF_INET]”xx removed xxxx"
Note:
- I have tried deleting and then adding back to the interface but does not resolve
- currently using FW 1.9, but had the same issue on 1.7
- using PIA openVPN config file with aes 128
++++Im looking for advise on how to fix this/what to be looking at? Thank you++++