Topology:
Okay, I trying to configure VLANs to switch0 interface on my EdgeRouter POE but have few problems.
Switch0 includes ethernet interface eth2, eth3 and eth4. As it's on topology I want configure ethernet interfaces on following way:
Eth2 to the L2 switch: VLAN trunk, all used VLANs, VLAN 102 (MGT) untagged
Eth3 to the AP: VLAN trunk, all used VLANs, VLAN 102 (MGT) untagged
Eth4 to the IP Phone: VLAN trunk, voice VLAN and maybe VLAN 101 for ethernet pass-through
When I configuring VLANs to switch interface I get following errors.
ubnt@edge-hki-r01# set interfaces switch switch0 switch-port vlan-aware enable Error: platform does not support this setting in switch0 ubnt@edge-hki-r01# set interfaces switch switch0 switch-port interface eth2 vlan pvid 102 Error: platform does not support vlan settings in switch0
How these interface VLANs should be configured?
Why this isn't working?